Iya, jika bridge jika mau add VM baru berarti mas isinya
IP : 119.81.105.180
gateway : 119.81.105.177
subnet mask : 255.255.255.248
Misalnya itu untuk VM-A
Jika mau add VMs lagi lanjut dgn segment IP yg sama
jadi sekarang settingannya gmna mas? ini settingan standartnya
############################################
#For more information, see interfaces(5).
############################################
##Loopback
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
#pre-up /sbin/ethtool -s eth0 autoneg off speed 1000 duplex full
address 10.66.118.194
netmask 255.255.255.192
up route add -net 10.0.0.0/8 gateway 10.66.118.193
down route del -net 10.0.0.0/8
up route add -net 161.26.0.0/16 gateway 10.66.118.193
down route del -net 161.26.0.0/16
auto eth1
iface eth1 inet static
#pre-up /sbin/ethtool -s eth1 autoneg off speed 1000 duplex full
address 119.81.105.179
netmask 255.255.255.248
gateway 119.81.105.177
auto eth1:1
iface eth1:1 inet static
address 119.81.41.120
netmask 255.255.255.255
auto eth1:2
iface eth1:2 inet static
address 119.81.41.121
netmask 255.255.255.255
auto eth1:3
iface eth1:3 inet static
address 119.81.41.122
netmask 255.255.255.255
auto eth1:4
iface eth1:4 inet static
address 119.81.41.123
auto eth1:5
iface eth1:5 inet static
address 119.81.41.124
netmask 255.255.255.255
auto eth1:6
iface eth1:6 inet static
address 119.81.41.125
netmask 255.255.255.255
auto eth1:7
iface eth1:7 inet static
address 119.81.41.126
netmask 255.255.255.255
auto eth1:8
iface eth1:8 inet static
address 119.81.41.127
netmask 255.255.255.255
jadi settingannya gmna mas? maaf bgt nih bingung, gagal terus... mohon dibimbing ya